null
  Loading... Please wait...
  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5

Mudder Clutch Kit - 28" + Tires - WE437653

$219.99
Part #:
WE437653
Condition:
New
Rating:
Shipping:
Calculated at checkout
Quantity:


Product Description

Fits:

Suzuki 750 King Quad AXi 2019-23

  • Designed for 28"+ Tires
  • 0-3000' Elevation
  • Helps restore power loss due to addition of larger tires
  • Allows for easier turning of larger tires in the mud
  • Better low end power and torque
  • Quicker backshift which results in crisp throttle response
  • Reduces belt slip and clutch heat
  • Additional tools required for installation: Clutch Compression Tool, Sliding Shaft, Clutch Shoe Remover, Internal clutch housing gasket and Suzuki Motor Oil
  • Clutch kit components may vary from photo

Warranty Information

WARRANTY POLICY

EPI warrants its products to be free of defects in material and manufacturing for 1 year from the original date of purchase. This does not apply to electrical components, non-EPI branded parts, OEM primary and secondary clutches, normal wear or conditions resulting from misuse, abuse, negligence, accident, improper application, improper installation or alteration. This warranty covers the repair or replacement of the EPI product in question only, and does not cover labor charges to remove or install the EPI part or any other part or component that may incur damage as a result of a defective EPI part. The customer is responsible for any labor charges involved in removing and replacing the defective part, and for shipping charges to return the defective part to EPI.

BELTS: If, within 1 year of original PURCHASE date, the EPI belt fails due to a defect in material or manufacturing, a replacement belt will be provided by EPI upon inspection. A $20 handling fee and certain conditions apply, please see your EPI belt sleeve warranty form or contact our Returns Department at 218-829-6036 for details, and request a warranty claim card.

Value Line Clutches: Due to the primary clutch being a normal wear item and the extreme conditions it operates in, we offer a limited 30 day warranty on manufacturing defects only. If you experience any failure of this clutch within 30 days that is not due to normal wear and use, we will inspect and replace the clutch if we determine it was due to a manufacturing defect. Customer is responsible for shipping costs to return the clutch for inspection. This warranty does not cover any damage caused by a clutch failure or labor costs.

WHEEL SHAFTS & CV Joints: EPI Wheel shafts and CV Joints that are determined to have a defect in material or manufacturing will be replaced at no charge within 60 days of original purchase date. After 60 days and up to 1 year of the original purchase date a $25 fee will be charged for replacement. EPI Wheel shafts and CV Joints are designed for use on STOCK machines. If your machine is lifted in any way this may result in failure of the component that is not covered by warranty. A lifted machine results in a more severe CV joint angle and our replacement components are not designed to tolerate this increase in angle and may fail. Upon inspection, if any of the related signs of over-extended angles are present, the warranty will be void. Customer is responsible for shipping the failed component to EPI for warranty inspection. This one year warranty does not apply to damages caused by removal of parts, modifications to the product, normal wear and tear, damages caused by accidents, improper use of the product, improper installation of the product, misuse, neglect or improper maintenance. The one (1) year does not cover use of the product for racing or other competitive activities. The warranty does not apply to rental or commercial purpose uses.

Electrical components are not covered under any warranty and cannot be returned once installed or connected to power. Electrical components include but are not limited to: switches, ignition coils, CDI boxes and regulators.

Normal wear items: Normal Wear Items are not covered under warranty unless, within 1 year of original PURCHASE date, the EPI part fails due to a defect in material or manufacturing. In this case, a replacement part will be provided by EPI upon inspection. Normal wear items include but are not limited to: Ball joints, belts, brake pads and shoes, brake rotors, bearings, carbide runners, clutch rebuild kits, CV boots, seals, springs, suspension rebuild kits & components, slides, tie rod ends and u- joints.

WARRANTY IS VOID on any vehicle that has been altered in any way to include performance enhancements to the engine other than the OE DESIGN.

EPI reserves the right to make the determination if the part has been subject to normal wear, misuse, abuse, negligence, accident, improper application, improper installation or alteration, and all such determination shall be final.

All warranty claims will be handled directly by EPI. To obtain service under this warranty please contact EPI for return authorization. Cost of removal, reinstallation, product pick up and delivery are the sole responsibility of the original owner. Retail customers must provide proof of purchase with in 1 year for warranty to be honored. ALL RETURNS FOR WARRANTY MUST BE PRE-APPROVED WITH AN RA NUMBER DISPLAYED ON THE BOX. PRODUCT MUST BE RECEIVED WITHIN 15 DAYS OF DATE RETURN AUTHORIZATION IS ISSUED.

EPI has no control over the use of any part. EPI expects the customer to exercise good judgment as to the proper selection, installation, use and maintenance of any part. EPI assumes no responsibility for damage or injury of any kind because of normal wear, misuse, abuse, negligence, accident, improper application, improper installation or alteration of any parts in any way by any person. EPI reserves the right to make changes to the warranty policy at any time without notice.

PROP 65 WARNINGS

Clutch Kits:
Prop 65 Warning WARNING: This product can expose you to chemicals including nickel, which is known to the State of California to cause cancer, and toluene, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Clutch Pullers:
Prop 65 Warning WARNING: This product can expose you to chemicals including chromium, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Clutch Springs:
Prop 65 Warning WARNING: This product can expose you to chemicals including carbon black, which is known to the State of California to cause cancer, and toluene, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Lift Kits:
Prop 65 Warning WARNING: This product can expose you to chemicals including chromium, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Suspension Springs:
Prop 65 Warning WARNING: This product can expose you to chemicals including carbon black which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.

Tools:
Prop 65 Warning WARNING: This product can expose you to chemicals including chromium, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.

Fly Weights:
Prop 65 Warning WARNING: This product can expose you to chemicals including nickel, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.

Roller Weights:
Prop 65 Warning WARNING: This product can expose you to chemicals including chromium, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Reviews

Write your own product review

  1. Exactly as advertised 5 Star Review

    Posted by on 30th May 2022

    2021 KQ 750 power steering

    26x11 rear 26x9 front Sedona Mud Rebel RT

    Works fantastic. No belt slip, quad accelerates better than before, and it was easy to install. Time consuming, but the instructions were easy to follow. I know I only have 26's, but they're HEAVY, so yes I did have belt slip before installing this. I have no doubt it'll hold up to 28" aztex. One thing of note, when the website mentions you need an $80 tool, you might be thinking you can go without it, I can assure you, you cannot. For the clutch holders, I drilled holes in an aluminum bar and put bolts through it and it held the clutches just fine to take off the bolts. Overall, very satisfied with the clutch and will be happily putting that EPI sticker on my quad.


  2. Noticed little improvement 3 Star Review

    Posted by on 1st Jul 2021

    Recently installed on 2020 suzuki king quad 750 the mudder clutch kit. Green spring with new rollers and purple stall springs on wet clutch. I've not had it in the mud yet but on dry ground with 27x10x12 sti out back max tires on it I've seen very little improvement. I did install the utility performance clutch on my 2018 500 king over a year ago and there was a marginal difference with it so I figured this would be huge with my 750 and it wasnt. Giving it 3 stars at best because I'm not satisfied with very little difference after all the money spent on a kit gaskets and tools and the time it took to clean it spotless then build it. It wont even pull the front tires up now and it did before


Related Products

Join Our Email Club


Categories