null
  Loading... Please wait...
  • Mudder Clutch Kit WE437427
  • Image 2
  • Image 3
  • Image 4

Mudder Clutch Kit - 28" + Tires - WE437427

$219.99
Part #:
WE437427
Condition:
New
Rating:
Shipping:
Calculated at checkout
Quantity:


Product Description

Fits:

Can-Am 1000 HD10 Defender / Defender Max 2016-19

  • Designed for 28"+ Tires
  • 0-3000' Elevation
  • Helps restore power loss due to addition of larger tires
  • Allows for easier turning of larger tires in the mud
  • Better low end power and torque
  • Quicker backshift which results in crisp throttle response
  • Reduces belt slip and clutch heat
  • Tools Required: Primary Clutch Puller PCP-16 and Clutch Compression Tool CCT820
  • Clutch kit components may vary from photo

Warranty Information

WARRANTY POLICY

EPI warrants its products to be free of defects in material and manufacturing for 1 year from the original date of purchase. This does not apply to electrical components, non-EPI branded parts, OEM primary and secondary clutches, normal wear or conditions resulting from misuse, abuse, negligence, accident, improper application, improper installation or alteration. This warranty covers the repair or replacement of the EPI product in question only, and does not cover labor charges to remove or install the EPI part or any other part or component that may incur damage as a result of a defective EPI part. The customer is responsible for any labor charges involved in removing and replacing the defective part, and for shipping charges to return the defective part to EPI.

BELTS: If, within 1 year of original PURCHASE date, the EPI belt fails due to a defect in material or manufacturing, a replacement belt will be provided by EPI upon inspection. A $20 handling fee and certain conditions apply, please see your EPI belt sleeve warranty form or contact our Returns Department at 218-829-6036 for details, and request a warranty claim card.

Value Line Clutches: Due to the primary clutch being a normal wear item and the extreme conditions it operates in, we offer a limited 30 day warranty on manufacturing defects only. If you experience any failure of this clutch within 30 days that is not due to normal wear and use, we will inspect and replace the clutch if we determine it was due to a manufacturing defect. Customer is responsible for shipping costs to return the clutch for inspection. This warranty does not cover any damage caused by a clutch failure or labor costs.

WHEEL SHAFTS & CV Joints: EPI Wheel shafts and CV Joints that are determined to have a defect in material or manufacturing will be replaced at no charge within 60 days of original purchase date. After 60 days and up to 1 year of the original purchase date a $25 fee will be charged for replacement. EPI Wheel shafts and CV Joints are designed for use on STOCK machines. If your machine is lifted in any way this may result in failure of the component that is not covered by warranty. A lifted machine results in a more severe CV joint angle and our replacement components are not designed to tolerate this increase in angle and may fail. Upon inspection, if any of the related signs of over-extended angles are present, the warranty will be void. Customer is responsible for shipping the failed component to EPI for warranty inspection. This one year warranty does not apply to damages caused by removal of parts, modifications to the product, normal wear and tear, damages caused by accidents, improper use of the product, improper installation of the product, misuse, neglect or improper maintenance. The one (1) year does not cover use of the product for racing or other competitive activities. The warranty does not apply to rental or commercial purpose uses.

Electrical components are not covered under any warranty and cannot be returned once installed or connected to power. Electrical components include but are not limited to: switches, ignition coils, CDI boxes and regulators.

Normal wear items: Normal Wear Items are not covered under warranty unless, within 1 year of original PURCHASE date, the EPI part fails due to a defect in material or manufacturing. In this case, a replacement part will be provided by EPI upon inspection. Normal wear items include but are not limited to: Ball joints, belts, brake pads and shoes, brake rotors, bearings, carbide runners, clutch rebuild kits, CV boots, seals, springs, suspension rebuild kits & components, slides, tie rod ends and u- joints.

WARRANTY IS VOID on any vehicle that has been altered in any way to include performance enhancements to the engine other than the OE DESIGN.

EPI reserves the right to make the determination if the part has been subject to normal wear, misuse, abuse, negligence, accident, improper application, improper installation or alteration, and all such determination shall be final.

All warranty claims will be handled directly by EPI. To obtain service under this warranty please contact EPI for return authorization. Cost of removal, reinstallation, product pick up and delivery are the sole responsibility of the original owner. Retail customers must provide proof of purchase with in 1 year for warranty to be honored. ALL RETURNS FOR WARRANTY MUST BE PRE-APPROVED WITH AN RA NUMBER DISPLAYED ON THE BOX. PRODUCT MUST BE RECEIVED WITHIN 15 DAYS OF DATE RETURN AUTHORIZATION IS ISSUED.

EPI has no control over the use of any part. EPI expects the customer to exercise good judgment as to the proper selection, installation, use and maintenance of any part. EPI assumes no responsibility for damage or injury of any kind because of normal wear, misuse, abuse, negligence, accident, improper application, improper installation or alteration of any parts in any way by any person. EPI reserves the right to make changes to the warranty policy at any time without notice.

PROP 65 WARNINGS

Clutch Kits:
Prop 65 Warning WARNING: This product can expose you to chemicals including nickel, which is known to the State of California to cause cancer, and toluene, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Clutch Pullers:
Prop 65 Warning WARNING: This product can expose you to chemicals including chromium, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Clutch Springs:
Prop 65 Warning WARNING: This product can expose you to chemicals including carbon black, which is known to the State of California to cause cancer, and toluene, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Lift Kits:
Prop 65 Warning WARNING: This product can expose you to chemicals including chromium, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Suspension Springs:
Prop 65 Warning WARNING: This product can expose you to chemicals including carbon black which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.

Tools:
Prop 65 Warning WARNING: This product can expose you to chemicals including chromium, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.

Fly Weights:
Prop 65 Warning WARNING: This product can expose you to chemicals including nickel, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.

Roller Weights:
Prop 65 Warning WARNING: This product can expose you to chemicals including chromium, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Reviews

Write your own product review

  1. Good decision 5 Star Review

    Posted by on 12th Jul 2024

    I had the secondary rollers blow up in my 19 defender hd10. At first I was planning on just doing rollers. But decided since I was working in there I may as well replace the spring. Made the call to Mike ( I believe). I told him I wanted a helix.... said it only came in this kit. So I bought it. He told me to use the almond spring for my application.
    What a difference of a machine now!!! No hesitation. No bog. No herk and jerk. Soooooo smooth!


  2. EPI MUDDER CLITCH KIT 5 Star Review

    Posted by on 15th May 2024

    Installed on a 2019 Can Am Defender hd10 XT. What a way to bring life into the older as well as the new. Wish I had done it from day one. Low end torque…check. Quicker throttle response…check. You can definitely tell an immediate difference. I run 30” Carnivores and do not hit the mud parks but do like trail and the mountains. Perfect setup for my activities. Thanks for a sound product EPI.


  3. Wow!!!! 5 Star Review

    Posted by on 7th Sep 2022

    If I hadn’t broken my stock clutch I wouldn’t have stumbled upon this power adder! Didn’t realize how underpowered my rig was with oversized truck tires. Very impressed!!!! 2019 hd10 max with 33” truck tires


  4. Best upgrade yet 5 Star Review

    Posted by on 23rd Sep 2019

    I recently installed the clutch kit on my defender hd10xt. I have 31" tires currently. My only regret is I rode it with stock clutching for so long. By far one of the best things I've done yet


  5. Brings your rig to life 5 Star Review

    Posted by on 2nd Jul 2019

    Works great, green spring and 29" xm310s. In high it gets you up to 50mph quick, in low it nearly doubled my acceleration. 2016 defender hd10


Related Products

Join Our Email Club


Categories