Fits:
Kawasaki
Mule Pro-FX / Pro-FXR / Pro-FXT 2015-20
WARRANTY POLICY
EPI warrants its products to be free of defects in material and manufacturing for 1 year from the original date of purchase. This does not apply to electrical components, non-EPI branded parts, OEM primary and secondary clutches, normal wear or conditions resulting from misuse, abuse, negligence, accident, improper application, improper installation or alteration. This warranty covers the repair or replacement of the EPI product in question only, and does not cover labor charges to remove or install the EPI part or any other part or component that may incur damage as a result of a defective EPI part. The customer is responsible for any labor charges involved in removing and replacing the defective part, and for shipping charges to return the defective part to EPI.
BELTS: If, within 1 year of original PURCHASE date, the EPI belt fails due to a defect in material or manufacturing, a replacement belt will be provided by EPI upon inspection. A $20 handling fee and certain conditions apply, please see your EPI belt sleeve warranty form or contact our Returns Department at 218-829-6036 for details, and request a warranty claim card.
Value Line Clutches: Due to the primary clutch being a normal wear item and the extreme conditions it operates in, we offer a limited 30 day warranty on manufacturing defects only. If you experience any failure of this clutch within 30 days that is not due to normal wear and use, we will inspect and replace the clutch if we determine it was due to a manufacturing defect. Customer is responsible for shipping costs to return the clutch for inspection. This warranty does not cover any damage caused by a clutch failure or labor costs.
WHEEL SHAFTS & CV Joints: EPI Wheel shafts and CV Joints that are determined to have a defect in material or manufacturing will be replaced at no charge within 60 days of original purchase date. After 60 days and up to 1 year of the original purchase date a $25 fee will be charged for replacement. EPI Wheel shafts and CV Joints are designed for use on STOCK machines. If your machine is lifted in any way this may result in failure of the component that is not covered by warranty. A lifted machine results in a more severe CV joint angle and our replacement components are not designed to tolerate this increase in angle and may fail. Upon inspection, if any of the related signs of over-extended angles are present, the warranty will be void. Customer is responsible for shipping the failed component to EPI for warranty inspection. This one year warranty does not apply to damages caused by removal of parts, modifications to the product, normal wear and tear, damages caused by accidents, improper use of the product, improper installation of the product, misuse, neglect or improper maintenance. The one (1) year does not cover use of the product for racing or other competitive activities. The warranty does not apply to rental or commercial purpose uses.
Electrical components are not covered under any warranty and cannot be returned once installed or connected to power. Electrical components include but are not limited to: switches, ignition coils, CDI boxes and regulators.
Normal wear items: Normal Wear Items are not covered under warranty unless, within 1 year of original PURCHASE date, the EPI part fails due to a defect in material or manufacturing. In this case, a replacement part will be provided by EPI upon inspection. Normal wear items include but are not limited to: Ball joints, belts, brake pads and shoes, brake rotors, bearings, carbide runners, clutch rebuild kits, CV boots, seals, springs, suspension rebuild kits & components, slides, tie rod ends and u- joints.
WARRANTY IS VOID on any vehicle that has been altered in any way to include performance enhancements to the engine other than the OE DESIGN.
EPI reserves the right to make the determination if the part has been subject to normal wear, misuse, abuse, negligence, accident, improper application, improper installation or alteration, and all such determination shall be final.
All warranty claims will be handled directly by EPI. To obtain service under this warranty please contact EPI for return authorization. Cost of removal, reinstallation, product pick up and delivery are the sole responsibility of the original owner. Retail customers must provide proof of purchase with in 1 year for warranty to be honored. ALL RETURNS FOR WARRANTY MUST BE PRE-APPROVED WITH AN RA NUMBER DISPLAYED ON THE BOX. PRODUCT MUST BE RECEIVED WITHIN 15 DAYS OF DATE RETURN AUTHORIZATION IS ISSUED.
EPI has no control over the use of any part. EPI expects the customer to exercise good judgment as to the proper selection, installation, use and maintenance of any part. EPI assumes no responsibility for damage or injury of any kind because of normal wear, misuse, abuse, negligence, accident, improper application, improper installation or alteration of any parts in any way by any person. EPI reserves the right to make changes to the warranty policy at any time without notice.
PROP 65 WARNINGS>
Clutch Kits:
WARNING: This product can expose you to chemicals including nickel, which is known to the State of California to cause cancer, and toluene, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Clutch Pullers:
WARNING: This product can expose you to chemicals including chromium, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Clutch Springs:
WARNING: This product can expose you to chemicals including carbon black, which is known to the State of California to cause cancer, and toluene, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Lift Kits:
WARNING: This product can expose you to chemicals including chromium, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Suspension Springs:
WARNING: This product can expose you to chemicals including carbon black which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.
Tools:
WARNING: This product can expose you to chemicals including chromium, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.
Fly Weights:
WARNING: This product can expose you to chemicals including nickel, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.
Roller Weights:
WARNING: This product can expose you to chemicals including chromium, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Showing reviews 1-6 of 16 | Next
Posted by Unknown on 19th Feb 2024
2019 Kawasaki Mule Pro-FXT, 4” lift rolling 31” tires. Install of this kit was easy. Just followed the instructions and watched the YouTube video. You will need a secondary clutch compression tool. Better Torque and Added a little Top End Speed
Posted by David Wight on 23rd Nov 2021
This kit has made a huge difference, I have a Pro FXT that carries a double dog boxes 6 dogs and two old guys on 31" Sedona tires without any struggles...
Posted by Steve on 2nd Nov 2021
The mule pro fxt is no powerhouse. The EPI clutch kit helped wake it up a bit and keep the power reasonably close to stock levels when going to larger tires. The kit had good instructions and was easy to install with the clutch compression tool (sold separately). EPI also has a nice step by step video online. My only complaint is I wish there were more options to get a little more power out of this machine.
Posted by Roy White on 14th Jun 2021
Install was a breeze, took far longer to fabricate a secondary clutch tool than it did to swap the springs. All in (even with a trip to the hardware store for all thread), 2.5 hours total. I used the pink secondary spring, as I have 29” tires and a ton of heavy accessories. It brought back the low end I was missing in high range and only sacrificed 2 mph on top speed. If you are on the fence, do it. Well worth the money!
Posted by LG on 8th Jun 2021
This was a great upgrade for my ‘19 Mule ProFXT. I have a 3 inch lift with 28 inch tires, the kit helped bring back torque and speed. I used the white and yellow spring.
Posted by Harvey Bohman on 2nd Apr 2021
Since the day we bought our Mule.Its always had a weird jerky take off from a dead stop and at low speed like loading it onto a trailer. Very anoying .
I have asked around,read different sxs fourms. I never really found a "fix".
Then i stumbled across EPI. I did some reading about EPI's products, Sent an E-mail asking some questions. My e-mail was returned the same day !
So i decided on the EPI Economy Clutch Kit - WE437501,and belt.
EPI is over the top on the video the supports the installition of the Clutch kit. I used the []spring in the Primary & the []spring in the secondary .
First thing i noticed, No jerky take off. great low to mid throtle responce. problem solved !!!!!
I would high recommend this up grade for your Mule Pro Fxt.
We are currnetly upgrading the stock shocks to the ELKA stage 1, and new wheels and tires 28/10R.14.
Showing reviews 1-6 of 16 | Next